Jmol Applet/Legacy

From Jmol
Revision as of 11:22, 11 February 2020 by AngelHerraez (talk | contribs) (moving aside the legacy information (applet))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Note: descriptions in this page relate to procedures that are now obsolete, due to the removal of support for Java applets in current web browsers. The parent page has the currently valid information.


Geographylogo.png

Reference: English – Other: 日本語 ·


Running Jmol / JSmol

Jmol Applet

Java applet version of Jmol which allows Jmol to be embedded in web pages (given that viewers have a Java plugin installed). Like with the application, commands can be applied to the model using the Scripting language.

Installing Jmol applets

If you only wish to create a web page(s) containing molecular scenes in Jmol, there are easier ways than starting from scratch: see #Tools for Authoring Jmol Web Pages. If you wish to learn how to create web pages containing Jmol from scratch, read on.

Download the Jmol package (either .zip or tar.gz format) and extract/uncompress only the necessary files to the folder of your choice.

Which are those necessary files? Read subsections below.

To use the Jmol applet within local web pages, e.g. on the hard disk or on CD, see Jmol Applet Deployment Local for some precautions needed.

For some specific needs, you must use other files; read the sections below about the signed applet.

If the applet does not load, see also Solving Java Problems.

If you distribute your web page files, you should also include the copyright, license and information files: File icon.gifCOPYRIGHT.txt, File icon.gifLICENSE.txt and File icon.gifREADME.txt

Inserting Jmol applets into web pages

Inclusion of Jmol applets and interaction with them are managed easily using a JavaScript-based solution:

The Jmol.js library

For Jmol 12 (and Jmol 13, if desired), the Jmol.js library provides a set of simple scripting commands that allow rapid construction of web pages that include user interactivity such as buttons, checkboxes, links, and menus. Note that all functions in Jmol.js have been implemented with counterparts in Jmol-JSO. For an overview of these functions, see the Jmol.js online documentation or, for the most up-to-date info, just browse the Jmol.js source file.

Note: The download for Jmol version 13.2 or later does not include this file. If you still want to use it, you can get it individually from the Jmol repository. Particularly, new security policies that are being enforced in Java will make the old versions of File icon.gifJmol.js nonfunctional starting January 2014. (From then on, the code for inserting the applet in the webpage must declare some permissions attribute.) If you cannot switch your website to using Jmol-JSO or using the transitional adapter Jmol2.js, you should start substituting your existing Jmol.js file with the updated Jmol.js (download).

Jmol Applet JAR files

Regardless of which JavaScript library is used, Jmol-JSO or Jmol.js, there are four different ways to implement Jmol as an applet:

  • Monolithic unsigned applet You can include File icon.gifJmolApplet.jar on your web site and just use that. If using Jmol.js, the applet will only have access to files on your site; if using Jmol-JSO, the applet will have access to files on your site as well as files at public databases.
  • Modular unsigned applet You can include File icon.gifJmolApplet0.jar and related files (54 File icon.gifjar files total) on your site. Although a large number of files, the advantage of the modular applet is that only those parts of Jmol that are necessary are downloaded by the user's browser initially, and additional components are transferred only as needed. This allows the applet to load much faster.
  • Monolithic signed applet File icon.gifJmolAppletSigned.jar is a large (2.5+ MB) single file that includes all of Jmol in the form of a signed applet. The signed applet has substantially more capability, including full cross-domain file access and the capability to transfer files to and from the user's hard drive.
  • Modular signed applet File icon.gifJmolAppletSigned0.jar and related files, like JmolApplet0.jar, allows modular as-needed transfer of files from your site to the user's browser. This is the preferred method of using the signed applet.

Giving the Jmol applet more memory to work with

Note: This can now be done using Jmol.js (jmolSetMemoryMb(nMb)) or Jmol-JSO (Info.memoryLimit = nMb).

Memory available to Jmol is determined by Java. You can check the current memory allocation by opening the pop-up menu in the applet, and the last submenu "About Jmol".

Less or more memory can be allocated by using this parameter:

-Xmx###M

where the ### must be substituted by a number in megabytes (hence the "M" after it). However, the amount of memory that can be allocated is limited by your existing RAM. For example, on a system with 512 MB RAM, a maximum of 256 MB is allowed for Java.

Examples:

  • -Xmx512M will give 512 Mb maximum memory available.
  • -Xmx1024M will give 1024 Mb maximum memory available.

The place to set this parameter depends upon your system:

Windows

  • Control Panel > Java icon (opens the Java Control Panel) > "Java" tab > "Applet run-time configuration" > "Show" button > on row "JRE" (latest version if there are several), click on the textbox under "Parameters" and type: -Xmx###M

Macintosh

  • OS 10.5 (Leopard): Double click on JavaPreferences.app (in /Applications/Utilities). In the 'General' tab, select the first version of Java that is in the list. This will activate the 'Options' button: click it. A box for 'Applet Runtime Parameters' will open, where you can enter the -Xmx###M parameter.
  • OS 10.4 (Tiger): Possibly look under /Applications/Utilities/Java/J2SE 5.0/Java Preferences, then look for the place to put the -Xmx###M
  • Or look in the Java Control Panel.

Note that this is a local setting, so it will only affect that computer. You cannot expect that visitors of your web pages will have the same Java memory configuration as you, so be careful when using this feature.

Technical details:

  • -Xmx sets the maximum memory heap size.
  • -Xms sets the minimum memory heap size.

See also the procedure for the application.

Forcing the JSmol applet to open in a certain language

The Jmol applet includes several languages (technically called localizations) for the user interface (pop-up menu). Jmol will open by default with the interface using the language of your operating system (ref.). However, if you need to change this:

  1. The language in Jmol can be switched anytime, from the pop-up menu, "Language" item near the bottom.
  2. Or, using the scripting language: language = "de" (you must use the keyword "language" and the two-letter language code: ca, cs, de, en, es, et, fr, nl, pt, tr, etc.).

Testing different Jmol versions

(This is an advanced feature)

You can force the use of a certain version of Jmol applet in any web page (even if that page is not yours), as long as the page was written using the standard, recommended code for inserting Jmol applets. The way to do so is:

On the URL line of the browser, add the following:

?_USE=JAVA&JAR= followed by the url of the File icon.gifJmolAppletSigned0.jar file your intend to use.

If there is already a ? in the URL, then use & for your addition, to preserve the logic of a url.

There will be a couple of warnings that you will have to accept, due to the potential security risk of replacing an applet with another coming from a totaly unrelated server. There may also be Java security issues still preventing the applet from loading files, unless you specify the signed applet.

For example:

http://proteopedia.org/w/Acetyl-CoA_carboxylase?_USE=JAVA&JAR=http://chemapps.stolaf.edu/jmol/jsmol/java/JmolAppletSigned0.jar

lets you use Bob's latest version of Jmol for that Proteopedia page. Try it.

If you just want a change to the signed version of the same applet, this shortcut notation may be used: ?_USE=SIGNED

(But note that the website author may have omitted the signed applet files in the server, so the applet will fail to load.)

Jmol in Wikis

The applet can be embedded in HTML (or XHTML) pages (examples are listed on Websites Using Jmol), but also, with some extra technologies, in Wiki pages (see Jmol Processor).

Unsigned vs. Signed Applet & Data Access

Java Warning Signed.png

The signed applet can load a molecular model from any http or ftp URL. However, the user will be asked to trust the signed applet (figure at right). This could be problematic since the publishing authority (jmol.org) "cannot be verified", and the security certificate was issued by a group that is "not trusted" (jmol.org). This is because it would be costly and cumbersome for each version of the applet to be signed by a trusted (commercial) authority.

The unsigned applet displays the molecule without asking the user to trust it. However, it is limited (for security reasons) to loading molecular models from the same http domain (server) that downloads the applet itself. FirstGlance in Jmol uses the unsigned applet by default, but the signed applet will be used when that "Advanced Option" is checked. Thus you can easily see both applets in action. Methods for accessing data files from arbitrary servers are described in some detail at PDB Data File Access Methods.
If you are not running the applet from any server, i.e., you are using a web page residing in a local disk, further security restrictions are applied by Java: molecular models can only be located in the same folder/directory as the applet files or below it; read Jmol Applet Deployment Local.

Saving Files from the Applet

Although this isn't obvious, the molecule that is being shown in the applet can be saved to local disk (even from the unsigned applet) unless the model was loaded inline, in which case this technique fails. To do so:

  1. Open the applet's menu (right-click, Ctrl+click, or click on bottom-right "Jmol" logo).
  2. Click on the last entry (About...).
  3. On the submenu that appears, the first entry is the name of the first model loaded. If it says "string" then the model was loaded inline and continuing will result in a "404" resource not found error. If the entry is a file name, then you can continue. If more than one file has been loaded, there will be a line for each on this submenu. Click on the one that you want to open or save. This will bring up another layer of menu options
  4. Click on the last entry (View + name of file)
  5. Depending on your browser's configuration, the file will be opened in the associated program ("helper application") or you will get an "Open or Save" dialog; choose Save and location in your disk.
In old Jmol versions:
  1. Open the applet's menu (right-click, Ctrl+click, or click on bottom-right "Jmol" logo).
  2. Click on topmost entry (name of molecule).
  3. On the submenu that appears, click on bottommost entry (name of model).
  4. Depending on your browser's configuration, the file will be opened in the associated program ("helper application") or you will get an "Open or Save" dialog; choose Save and location in your disk.
Warning: At least in Windows, modern browsers may detect this action as opening a pop-up window, so it's likely that the pop-up blocker will prevent you from seeing the "Open or Save" dialog. Pay attention to messages and options in your browser to allow pop-ups for the current page. (Such messages often appear as yellow bars at the top of the page, warnings in a toolbar, or hints in the status line at the bottom of the browser window.)
Note for Chime users: If you have MDL Chime installed, the molecule will be opened in a browser window using Chime. You just have to use Chime's menu (File > Save molecule as) to save the file to disk.

If the page uses the signed applet, there is a more intuitive and fully functional File submenu near the bottom of the popup menu.

In addition to saving the full model, a part of the molecule can be extracted and saved into MOL format. This is not so straightforward as the former, and is described in the "interactive scripting documentation" (see Jmol home page).

It is also possible to save the state of the molecule (rendering style, coloring, visibility, orientation, etc.). See save state and write state in the Jmol scripting documentation. This gives similar functionality to what can be done in Chime or Rasmol, although due to Java security restrictions, saving to a file is not available for the unsigned applet. Instead, you get the data in the console, from where you can copy to a text editor and then save from that.

Setting up a Jmol site in The Cloud, in an AWS S3 bucket

Oct 2013: This section describes how to set up a simple Jmol demonstration site in an S3 bucket. In passing it also confirms a working layout of JmolAppletxxx files, html files, model files as described above. Note this is purely for the Java version of Jmol, not JSmol.

AWS S3 (Amazon Web Services, Simple Storage Service) is ideal for setting up a simple demonstration Jmol site with embedded applets.

S3 provides reliable, cheap cloud storage, with a default web access service. Costs are negligible for a small site: http://aws.amazon.com/s3/pricing/ Also you get 12 months useful access free with the AWS Free Usage Tier. This gets around the many headaches of using web servers on institutional computers.

Example of S3 bucket used as Proteomics data archive, for academic paper Supplementary Information: http://mouse-brain-ptmome.s3.amazonaws.com/list.html

Example of S3 bucket used as a Jmol demo: http://ptmjmol.s3.amazonaws.com/section1/trace.html

Example of S3 bucket used as an image gallery: http://ptmgallery.s3.amazonaws.com/list.html

You probably already have an Amazon account for book purchase. If not, https://www.amazon.com and navigate to New Account. Then go to http://aws.amazon.com/console/ and sign in. Go to the S3 Console by clicking on "S3 Scalable Storage In The Cloud", or select S3 from the Services menu at the top left.

Create a bucket. Bucket names are unique across all the AWS data centres, so obvious ones like "test" or "mybucket" will already be taken. The bucket will be accessible at the base address http://bucketname.s3.amazonaws.com It will also be accessible via http://s3.amazonaws.com/bucketname/

The S3 Console provides simple facilites to create buckets, and folders and subfolders within them, and upload/download files, and also to set file permissions and Mime file types, and other general filesystem admin (rename, delete, cut/copy/paste etc). There are other methods such as commandline tools, and Gui-based apps (see below) which allow more streamlined control for large numbers of files or repetitive tasks.

A layout which works for model files local in the bucket is ..

bucketname
  Jmol.js
  JmolApplet.js
  JmolApplet.jar
  JmolApplet0.jar
  JmolApplet0_Console/Minimize/Popup/ReadersCifPdb/ReadersMolXyz/ReadersMore/ReadersQuantum/ReadersSimple.jar
  JmolApplet0_ReadersXml/ReadersXtal/ShapeBio/ShapeSpecial/ShapeSurface/Smiles/Spectrum/Symmetry.jar
  section1
    mydemo.html
  models
    1GFL.pdb
    4E50.pdb
   

Key script settings are ..

<html>
  ...  
  <script>
    jmolInitialize("..", window.location.protocol=="file:");  
    ...
    jmolApplet(600, "load ../models/1GFL.pdb");
    ...

In the bucket, all files should generally have Public Access permissions. HTML files should have type text/html, images should have type image/png etc. If these do not set themselves automatically during your file upload, they can be corrected in the S3 Properties - Permissions/Metadata gui. Note it is easy to lose these settings when re-uploading a new version of a file.

Software revisions were:

 Jmol 13.0.18 (installed in S3 bucket as per above .js and .jar files) 
 Browsers used in testing: Google Chrome 30.0, Firefox 24.0, Safari 5.1, Opera 12.16  
 Most development on Mac OS X 10.6.8, java 1.6.0_51. Tested on 10.8.5, Windows 7.

Some free tools to make S3 bucket management easier:

http://aws.amazon.com/developertools/739                                           ... a command-line tool
http://www.timkay.com/aws/                                                         ... another link to the above
http://s3browser.com/                                                              ... a good Windows S3 bucket manager with nice Gui.
http://www.cloudberrylab.com/free-amazon-s3-explorer-cloudfront-IAM.aspx           ... Amazon S3 client with full support

Contributors

AngelHerraez